> For the complete documentation index, see [llms.txt](https://guidelines.nhmrc.gov.au/australian-drinking-water-guidelines/llms.txt). Markdown versions of documentation pages are available by appending `.md` to page URLs; this page is available as [Markdown](https://guidelines.nhmrc.gov.au/australian-drinking-water-guidelines/figures.md). # Figures * Chapter 1: Introduction * [Figure 1.3](/australian-drinking-water-guidelines/intro/chapter-1/1.3-water-quality-characteristics/1.3.2-guideline-values.md) - Health-based targets for microbial, chemical and radiological parameters * Chapter 2: Framework for Management of Drinking Water Quality * [Figure 2.1](/australian-drinking-water-guidelines/part-1/chapter-2/2.2-structure-of-the-framework.md#fig-2-1) - Framework for management of drinking water quality * Chapter 5: Microbial Quality of Drinking Water * [Figure 5.1](/australian-drinking-water-guidelines/part-2/chapter-5/5.3-assessing-microbial-risk.md#fig-5-1) - QMRA and epidemiological approaches to characterising risks from drinking water sources * [Figure 5.2](/australian-drinking-water-guidelines/part-2/chapter-5/5.4-enteric-pathogens/5.4.3-management-of-risk-from-enteric-pathogens.md#fig-5-2) - Water safety continuum for drinking water supplies * [Figure 5.3](/australian-drinking-water-guidelines/part-2/chapter-5/5.4-enteric-pathogens/5.4.3-management-of-risk-from-enteric-pathogens.md#fig-5-3) - The representation of the theoretical decline in the number of cases per 1000 people per year attributed to Cryptosporidium * Chapter 9: Overview of Monitoring * [Figure 9.1](/australian-drinking-water-guidelines/part-3/chapter-9/9.2-monitoring-overview.md#fig-9-1) - Monitoring as part of an ongoing process of system management * [Figure 9.2](/australian-drinking-water-guidelines/part-3/chapter-9/9.3-developing-a-monitoring-program.md#fig-9-2) - Generic process for monitoring activities * [Figure 9.3](/australian-drinking-water-guidelines/part-3/chapter-9/9.5-verification-of-drinking-water-quality/9.5.2-drinking-water-quality-monitoring.md#fig-9-3) - Example of sample locations in a typical distribution system * Chapter 10: Monitoring for speciļ¬c characteristics in drinking water * [Figure 10.5.1](/australian-drinking-water-guidelines/part-3/chapter-10/10.3-assessing-performance-long-term-evaluation-of-monitoring/10.3.1-long-term-evaluation-of-microbial-performance.md#fig-10-5-1) - Cumulative frequency graph of filtered water turbidity * [Figure 10.5.2](/australian-drinking-water-guidelines/part-3/chapter-10/10.3-assessing-performance-long-term-evaluation-of-monitoring/10.3.1-long-term-evaluation-of-microbial-performance.md#fig-10-5-2) - Turbidity histogram * Information Sheets * [Figure IS2.2.1](/australian-drinking-water-guidelines/part-4/sampling/2.2-radiological-monitoring-and-assessment-of-performance.md#fig-is2-2-1) - Flowchart showing how to determine whether the radiological quality of drinking water complies with the Guidelines * [Figure IS3.1.1](/australian-drinking-water-guidelines/part-4/statistics/3.1-statistics-visualising-data.md#fig-is3-1-1) - Graphical presentation of iron data from Table IS3.1.1 * [Figure IS3.1.2](/australian-drinking-water-guidelines/part-4/statistics/3.1-statistics-visualising-data.md#fig-is3-1-2) - Histogram of data for selected analytes from Table IS3.1.1 * [Figure IS3.4.1](/australian-drinking-water-guidelines/part-4/statistics/3.4-statistics-control-charts-and-trends.md#fig-is3-4-1) - Example of a control chart for trihalomethanes data * [Figure IS3.5.1](/australian-drinking-water-guidelines/part-4/statistics/3.5-number-of-samples-required.md#fig-is3-5-1) - Level of confidence that 98% of water in a supply is free of faecal contamination for different numbers of samples when all samples tested are free of faecal contamination * [Figure IS3.5.2](/australian-drinking-water-guidelines/part-4/statistics/3.5-number-of-samples-required.md#fig-is3-5-2) - Level of confidence that 98% of water in a supply is free of faecal contamination for different numbers of samples when 1, 2, 3 or 4 samples give positive results * Appendix * [Figure A1.1](/australian-drinking-water-guidelines/appendices/appendix-1/a1.1-introduction.md#fig-a1-1) - Application of Framework elements 2 and 3 * [Figure A1.2](/australian-drinking-water-guidelines/appendices/appendix-1/a1.7-critical-control-points.md#fig-a1-2) - Critical control point decision tree * [Figure A3.1](/australian-drinking-water-guidelines/appendices/appendix-3/a3.2-adopting-the-qmra-approach-in-the-guidelines.md#fig-a3-1) - Derivation of LRVs from first principles * [Figure A3.2](/australian-drinking-water-guidelines/appendices/appendix-3/a3.3-qmra-framework-for-the-calculation-of-log10-reduction-values-lrvs.md#fig-a3-2) - QMRA framework applied to quantify LRVs for drinking water treatment